{"title":"Designer Liner","description":"Designer Liner is clay based and heavily pigmented. Use this versatile product to create fine detail with lines, dots, and letters.  The metal writer tip allows for ultimate control to draw ultra-fine or bold lines, typography and intricate illustrations. Designer Liner is best when used under non-moving transparent or semi-transparent glazes. Fires cone 06 - cone 6. Certified AP Non-toxic and Food Safe. Available in a variety of essential colors.","products":[{"product_id":"copy-of-designer-liner-assortment-kit-6-pack","title":"Designer Liner Black SG401-001","description":"\u003ch4\u003e\n\u003cspan\u003e 1.25 oz squeeze bottle (includes metal writing tip)\u003c\/span\u003eHelpful Hints\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eRemove the white cap then gently puncture plastic tip with the metal writer tip.\u003c\/li\u003e\n\u003cli\u003eAfter placing the metal tip onto the bottle cap, push the included pin through the small ziptop bag and seal (this makes it easier to keep track of the pin).\u003c\/li\u003e\n\u003cli\u003eKeep the pin in the metal writer tip when not in use.\u003c\/li\u003e\n\u003cli\u003eDesigner Liner is clay based. As such, it is the nature to dry quickly which can promote clogging in the narrow passages of the metal and or plastic tips.\u003c\/li\u003e\n\u003cli\u003eClear or transparent glazing is necessary for gloss finish. Designer Liner will fire matte when no glaze is applied over top.\u003c\/li\u003e\n\u003cli\u003eDesign work could be distorted when applied on top of glazes that have a tendency to move.\u003c\/li\u003e\n\u003cli\u003eWipe tip periodically on a damp sponge to keep clean.\u003c\/li\u003e\n\u003cli\u003eKeep the metal pin to unclog the tip and keep the metal writer tip free from debris.\u003c\/li\u003e\n\u003cli\u003eIf Designer Liner begins to dry in the bottle you can add a few drops of water to reconstitute Designer Liner. Stir and test for proper viscosity. Add water in small amounts to avoid over-thinning the Designer Liner.\u003c\/li\u003e\n\u003cli\u003ePlace some Designer Liner on a tile and use a CB-110 #10\/0 Liner Brush for extra fine outlining or detailing.\u003c\/li\u003e\n\u003cli\u003eDesigner Liner is not a dimensional product. If applied too thick or heavy, Designer Liner will crack and possibly pop off.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 style=\"clear: both;\"\u003eApplication Recommendations\u003c\/h4\u003e\n\u003cp\u003e\u003cem\u003eBottle Prep:\u003c\/em\u003e   Before first using the product you will need to punch a hole in the tip of the plastic screw cap using the writer tip provided. DO NOT CUT the plastic tip or make the tip opening larger than the thickness of the metal writer tip. The metal writer tip is threaded and will snuggly fit on the tip of the screw cap.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eApplying Color:\u003c\/em\u003e   Shake bottle to force color down into the tip. To initiate product flow, squeeze out a little of the product through the writer tip onto a paper towel. Use steady, even pressure to begin your detailing. Apply onto bisque or unfired glaze and then apply a clear glaze. Apply with a liner brush for fine outlining or brushstrokes. Use with Silkscreen Medium to apply silkscreen designs to bisque. Fire to shelf cone 05\/06 (1031°C\/999°C) or up to cone 6 (1222°C). Designer Liner is food safe with clear glaze applied overtop, AP Non-Toxic and Non Hazardous when used under normal conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eStorage:   \u003c\/em\u003eIf you anticipate using Designer Liner frequently, you may want to store the bottle with the metal tip left on the bottle. Place the metal straight pin (provided) into the metal writer tip as this will help keep the writer tip free from clogging. An alternative storage method is to remove the metal writer tip and reattach the white plastic tip to the screw cap. You will want to soak the metal writer tip in warm water to remove any traces of the designer liner from the nozzle. In either case it is important to minimize air exposure to Designer Liner. Always store at room temperature.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"River Craft Ceramics","offers":[{"title":"Default Title","offer_id":32198344343639,"sku":"SG401-001","price":6.25,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0014\/2858\/6583\/products\/mayco_sg401-700x700.jpg?v=1592785533"},{"product_id":"copy-of-designer-liner-black","title":"Designer Liner White SG402","description":"\u003ch4\u003e\u003cspan\u003e 1.25 oz squeeze bottle (includes metal writing tip).\u003c\/span\u003e\u003c\/h4\u003e\n\u003ch4 style=\"text-align: center;\"\u003e\u003ciframe allowfullscreen=\"\" src=\"https:\/\/www.youtube.com\/embed\/58itbO-IMUw\" width=\"560\" height=\"315\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/h4\u003e\n\u003ch4\u003eHelpful Hints\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eRemove the white cap then gently puncture plastic tip with the metal writer tip.\u003c\/li\u003e\n\u003cli\u003eAfter placing the metal tip onto the bottle cap, push the included pin through the small ziptop bag and seal (this makes it easier to keep track of the pin).\u003c\/li\u003e\n\u003cli\u003eKeep the pin in the metal writer tip when not in use.\u003c\/li\u003e\n\u003cli\u003eDesigner Liner is clay based. As such, it is the nature to dry quickly which can promote clogging in the narrow passages of the metal and or plastic tips.\u003c\/li\u003e\n\u003cli\u003eClear or transparent glazing is necessary for gloss finish. Designer Liner will fire matte when no glaze is applied over top.\u003c\/li\u003e\n\u003cli\u003eDesign work could be distorted when applied on top of glazes that have a tendency to move.\u003c\/li\u003e\n\u003cli\u003eWipe tip periodically on a damp sponge to keep clean.\u003c\/li\u003e\n\u003cli\u003eKeep the metal pin to unclog the tip and keep the metal writer tip free from debris.\u003c\/li\u003e\n\u003cli\u003eIf Designer Liner begins to dry in the bottle you can add a few drops of water to reconstitute Designer Liner. Stir and test for proper viscosity. Add water in small amounts to avoid over-thinning the Designer Liner.\u003c\/li\u003e\n\u003cli\u003ePlace some Designer Liner on a tile and use a CB-110 #10\/0 Liner Brush for extra fine outlining or detailing.\u003c\/li\u003e\n\u003cli\u003eDesigner Liner is not a dimensional product. If applied too thick or heavy, Designer Liner will crack and possibly pop off.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 style=\"clear: both;\"\u003eApplication Recommendations\u003c\/h4\u003e\n\u003cp\u003e\u003cem\u003eBottle Prep:\u003c\/em\u003e   Before first using the product you will need to punch a hole in the tip of the plastic screw cap using the writer tip provided. DO NOT CUT the plastic tip or make the tip opening larger than the thickness of the metal writer tip. The metal writer tip is threaded and will snuggly fit on the tip of the screw cap.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eApplying Color:\u003c\/em\u003e   Shake bottle to force color down into the tip. To initiate product flow, squeeze out a little of the product through the writer tip onto a paper towel. Use steady, even pressure to begin your detailing. Apply onto bisque or unfired glaze and then apply a clear glaze. Apply with a liner brush for fine outlining or brushstrokes. Use with Silkscreen Medium to apply silkscreen designs to bisque. Fire to shelf cone 05\/06 (1031°C\/999°C) or up to cone 6 (1222°C). Designer Liner is food safe with clear glaze applied overtop, AP Non-Toxic and Non Hazardous when used under normal conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eStorage:   \u003c\/em\u003eIf you anticipate using Designer Liner frequently, you may want to store the bottle with the metal tip left on the bottle. Place the metal straight pin (provided) into the metal writer tip as this will help keep the writer tip free from clogging. An alternative storage method is to remove the metal writer tip and reattach the white plastic tip to the screw cap. You will want to soak the metal writer tip in warm water to remove any traces of the designer liner from the nozzle. In either case it is important to minimize air exposure to Designer Liner. Always store at room temperature.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"River Craft Ceramics","offers":[{"title":"Default Title","offer_id":32198351618135,"sku":"SG4021","price":6.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0014\/2858\/6583\/products\/mayco_sg402-175x175.jpg?v=1592785603"},{"product_id":"copy-of-designer-liner-white","title":"Designer Liner Red SG403-001","description":"\u003ch4\u003e\u003cspan\u003e 1.25 oz squeeze bottle (includes metal writing tip).\u003c\/span\u003e\u003c\/h4\u003e\n\u003ch4\u003eHelpful Hints\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eRemove the white cap then gently puncture plastic tip with the metal writer tip.\u003c\/li\u003e\n\u003cli\u003eAfter placing the metal tip onto the bottle cap, push the included pin through the small ziptop bag and seal (this makes it easier to keep track of the pin).\u003c\/li\u003e\n\u003cli\u003eKeep the pin in the metal writer tip when not in use.\u003c\/li\u003e\n\u003cli\u003eDesigner Liner is clay based. As such, it is the nature to dry quickly which can promote clogging in the narrow passages of the metal and or plastic tips.\u003c\/li\u003e\n\u003cli\u003eClear or transparent glazing is necessary for gloss finish. Designer Liner will fire matte when no glaze is applied over top.\u003c\/li\u003e\n\u003cli\u003eDesign work could be distorted when applied on top of glazes that have a tendency to move.\u003c\/li\u003e\n\u003cli\u003eWipe tip periodically on a damp sponge to keep clean.\u003c\/li\u003e\n\u003cli\u003eKeep the metal pin to unclog the tip and keep the metal writer tip free from debris.\u003c\/li\u003e\n\u003cli\u003eIf Designer Liner begins to dry in the bottle you can add a few drops of water to reconstitute Designer Liner. Stir and test for proper viscosity. Add water in small amounts to avoid over-thinning the Designer Liner.\u003c\/li\u003e\n\u003cli\u003ePlace some Designer Liner on a tile and use a CB-110 #10\/0 Liner Brush for extra fine outlining or detailing.\u003c\/li\u003e\n\u003cli\u003eDesigner Liner is not a dimensional product. If applied too thick or heavy, Designer Liner will crack and possibly pop off.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 style=\"clear: both;\"\u003eApplication Recommendations\u003c\/h4\u003e\n\u003cp\u003e\u003cem\u003eBottle Prep:\u003c\/em\u003e   Before first using the product you will need to punch a hole in the tip of the plastic screw cap using the writer tip provided. DO NOT CUT the plastic tip or make the tip opening larger than the thickness of the metal writer tip. The metal writer tip is threaded and will snuggly fit on the tip of the screw cap.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eApplying Color:\u003c\/em\u003e   Shake bottle to force color down into the tip. To initiate product flow, squeeze out a little of the product through the writer tip onto a paper towel. Use steady, even pressure to begin your detailing. Apply onto bisque or unfired glaze and then apply a clear glaze. Apply with a liner brush for fine outlining or brushstrokes. Use with Silkscreen Medium to apply silkscreen designs to bisque. Fire to shelf cone 05\/06 (1031°C\/999°C) or up to cone 6 (1222°C). Designer Liner is food safe with clear glaze applied overtop, AP Non-Toxic and Non Hazardous when used under normal conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eStorage:   \u003c\/em\u003eIf you anticipate using Designer Liner frequently, you may want to store the bottle with the metal tip left on the bottle. Place the metal straight pin (provided) into the metal writer tip as this will help keep the writer tip free from clogging. An alternative storage method is to remove the metal writer tip and reattach the white plastic tip to the screw cap. You will want to soak the metal writer tip in warm water to remove any traces of the designer liner from the nozzle. In either case it is important to minimize air exposure to Designer Liner. Always store at room temperature.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"River Craft Ceramics","offers":[{"title":"Default Title","offer_id":32198353322071,"sku":"SG4031","price":6.25,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0014\/2858\/6583\/products\/mayco_sg403-175x175.jpg?v=1592785653"},{"product_id":"copy-of-designer-liner-red","title":"Designer Liner Blue SG404-001","description":"\u003ch4\u003e\u003cspan\u003e 1.25 oz squeeze bottle (includes metal writing tip).\u003c\/span\u003e\u003c\/h4\u003e\n\u003ch4\u003eHelpful Hints\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eRemove the white cap then gently puncture plastic tip with the metal writer tip.\u003c\/li\u003e\n\u003cli\u003eAfter placing the metal tip onto the bottle cap, push the included pin through the small ziptop bag and seal (this makes it easier to keep track of the pin).\u003c\/li\u003e\n\u003cli\u003eKeep the pin in the metal writer tip when not in use.\u003c\/li\u003e\n\u003cli\u003eDesigner Liner is clay based. As such, it is the nature to dry quickly which can promote clogging in the narrow passages of the metal and or plastic tips.\u003c\/li\u003e\n\u003cli\u003eClear or transparent glazing is necessary for gloss finish. Designer Liner will fire matte when no glaze is applied over top.\u003c\/li\u003e\n\u003cli\u003eDesign work could be distorted when applied on top of glazes that have a tendency to move.\u003c\/li\u003e\n\u003cli\u003eWipe tip periodically on a damp sponge to keep clean.\u003c\/li\u003e\n\u003cli\u003eKeep the metal pin to unclog the tip and keep the metal writer tip free from debris.\u003c\/li\u003e\n\u003cli\u003eIf Designer Liner begins to dry in the bottle you can add a few drops of water to reconstitute Designer Liner. Stir and test for proper viscosity. Add water in small amounts to avoid over-thinning the Designer Liner.\u003c\/li\u003e\n\u003cli\u003ePlace some Designer Liner on a tile and use a CB-110 #10\/0 Liner Brush for extra fine outlining or detailing.\u003c\/li\u003e\n\u003cli\u003eDesigner Liner is not a dimensional product. If applied too thick or heavy, Designer Liner will crack and possibly pop off.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 style=\"clear: both;\"\u003eApplication Recommendations\u003c\/h4\u003e\n\u003cp\u003e\u003cem\u003eBottle Prep:\u003c\/em\u003e   Before first using the product you will need to punch a hole in the tip of the plastic screw cap using the writer tip provided. DO NOT CUT the plastic tip or make the tip opening larger than the thickness of the metal writer tip. The metal writer tip is threaded and will snuggly fit on the tip of the screw cap.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eApplying Color:\u003c\/em\u003e   Shake bottle to force color down into the tip. To initiate product flow, squeeze out a little of the product through the writer tip onto a paper towel. Use steady, even pressure to begin your detailing. Apply onto bisque or unfired glaze and then apply a clear glaze. Apply with a liner brush for fine outlining or brushstrokes. Use with Silkscreen Medium to apply silkscreen designs to bisque. Fire to shelf cone 05\/06 (1031°C\/999°C) or up to cone 6 (1222°C). Designer Liner is food safe with clear glaze applied overtop, AP Non-Toxic and Non Hazardous when used under normal conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eStorage:   \u003c\/em\u003eIf you anticipate using Designer Liner frequently, you may want to store the bottle with the metal tip left on the bottle. Place the metal straight pin (provided) into the metal writer tip as this will help keep the writer tip free from clogging. An alternative storage method is to remove the metal writer tip and reattach the white plastic tip to the screw cap. You will want to soak the metal writer tip in warm water to remove any traces of the designer liner from the nozzle. In either case it is important to minimize air exposure to Designer Liner. Always store at room temperature.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"River Craft Ceramics","offers":[{"title":"Default Title","offer_id":32198354042967,"sku":"SG404-001","price":6.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0014\/2858\/6583\/products\/mayco_sg404-175x175.jpg?v=1592785690"},{"product_id":"copy-of-designer-liner-blue","title":"Designer Liner Green SG405-001","description":"\u003ch4\u003e\u003cspan\u003e 1.25 oz squeeze bottle (includes metal writing tip).\u003c\/span\u003e\u003c\/h4\u003e\n\u003ch4 style=\"text-align: center;\"\u003eHelpful Hints\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eRemove the white cap then gently puncture plastic tip with the metal writer tip.\u003c\/li\u003e\n\u003cli\u003eAfter placing the metal tip onto the bottle cap, push the included pin through the small ziptop bag and seal (this makes it easier to keep track of the pin).\u003c\/li\u003e\n\u003cli\u003eKeep the pin in the metal writer tip when not in use.\u003c\/li\u003e\n\u003cli\u003eDesigner Liner is clay based. As such, it is the nature to dry quickly which can promote clogging in the narrow passages of the metal and or plastic tips.\u003c\/li\u003e\n\u003cli\u003eClear or transparent glazing is necessary for gloss finish. Designer Liner will fire matte when no glaze is applied over top.\u003c\/li\u003e\n\u003cli\u003eDesign work could be distorted when applied on top of glazes that have a tendency to move.\u003c\/li\u003e\n\u003cli\u003eWipe tip periodically on a damp sponge to keep clean.\u003c\/li\u003e\n\u003cli\u003eKeep the metal pin to unclog the tip and keep the metal writer tip free from debris.\u003c\/li\u003e\n\u003cli\u003eIf Designer Liner begins to dry in the bottle you can add a few drops of water to reconstitute Designer Liner. Stir and test for proper viscosity. Add water in small amounts to avoid over-thinning the Designer Liner.\u003c\/li\u003e\n\u003cli\u003ePlace some Designer Liner on a tile and use a CB-110 #10\/0 Liner Brush for extra fine outlining or detailing.\u003c\/li\u003e\n\u003cli\u003eDesigner Liner is not a dimensional product. If applied too thick or heavy, Designer Liner will crack and possibly pop off.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 style=\"clear: both;\"\u003eApplication Recommendations\u003c\/h4\u003e\n\u003cp\u003e\u003cem\u003eBottle Prep:\u003c\/em\u003e   Before first using the product you will need to punch a hole in the tip of the plastic screw cap using the writer tip provided. DO NOT CUT the plastic tip or make the tip opening larger than the thickness of the metal writer tip. The metal writer tip is threaded and will snuggly fit on the tip of the screw cap.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eApplying Color:\u003c\/em\u003e   Shake bottle to force color down into the tip. To initiate product flow, squeeze out a little of the product through the writer tip onto a paper towel. Use steady, even pressure to begin your detailing. Apply onto bisque or unfired glaze and then apply a clear glaze. Apply with a liner brush for fine outlining or brushstrokes. Use with Silkscreen Medium to apply silkscreen designs to bisque. Fire to shelf cone 05\/06 (1031°C\/999°C) or up to cone 6 (1222°C). Designer Liner is food safe with clear glaze applied overtop, AP Non-Toxic and Non Hazardous when used under normal conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eStorage:   \u003c\/em\u003eIf you anticipate using Designer Liner frequently, you may want to store the bottle with the metal tip left on the bottle. Place the metal straight pin (provided) into the metal writer tip as this will help keep the writer tip free from clogging. An alternative storage method is to remove the metal writer tip and reattach the white plastic tip to the screw cap. You will want to soak the metal writer tip in warm water to remove any traces of the designer liner from the nozzle. In either case it is important to minimize air exposure to Designer Liner. Always store at room temperature.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"River Craft Ceramics","offers":[{"title":"Default Title","offer_id":32198355091543,"sku":"SG4051","price":6.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0014\/2858\/6583\/products\/mayco_sg405-175x175.jpg?v=1592785757"},{"product_id":"copy-of-designer-liner-green","title":"Designer Liner Brown SG406-001","description":"\u003ch4\u003e\u003cspan\u003e 1.25 oz squeeze bottle (includes metal writing tip).\u003c\/span\u003e\u003c\/h4\u003e\n\u003ch4\u003eHelpful Hints\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eRemove the white cap then gently puncture plastic tip with the metal writer tip.\u003c\/li\u003e\n\u003cli\u003eAfter placing the metal tip onto the bottle cap, push the included pin through the small ziptop bag and seal (this makes it easier to keep track of the pin).\u003c\/li\u003e\n\u003cli\u003eKeep the pin in the metal writer tip when not in use.\u003c\/li\u003e\n\u003cli\u003eDesigner Liner is clay based. As such, it is the nature to dry quickly which can promote clogging in the narrow passages of the metal and or plastic tips.\u003c\/li\u003e\n\u003cli\u003eClear or transparent glazing is necessary for gloss finish. Designer Liner will fire matte when no glaze is applied over top.\u003c\/li\u003e\n\u003cli\u003eDesign work could be distorted when applied on top of glazes that have a tendency to move.\u003c\/li\u003e\n\u003cli\u003eWipe tip periodically on a damp sponge to keep clean.\u003c\/li\u003e\n\u003cli\u003eKeep the metal pin to unclog the tip and keep the metal writer tip free from debris.\u003c\/li\u003e\n\u003cli\u003eIf Designer Liner begins to dry in the bottle you can add a few drops of water to reconstitute Designer Liner. Stir and test for proper viscosity. Add water in small amounts to avoid over-thinning the Designer Liner.\u003c\/li\u003e\n\u003cli\u003ePlace some Designer Liner on a tile and use a CB-110 #10\/0 Liner Brush for extra fine outlining or detailing.\u003c\/li\u003e\n\u003cli\u003eDesigner Liner is not a dimensional product. If applied too thick or heavy, Designer Liner will crack and possibly pop off.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 style=\"clear: both;\"\u003eApplication Recommendations\u003c\/h4\u003e\n\u003cp\u003e\u003cem\u003eBottle Prep:\u003c\/em\u003e   Before first using the product you will need to punch a hole in the tip of the plastic screw cap using the writer tip provided. DO NOT CUT the plastic tip or make the tip opening larger than the thickness of the metal writer tip. The metal writer tip is threaded and will snuggly fit on the tip of the screw cap.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eApplying Color:\u003c\/em\u003e   Shake bottle to force color down into the tip. To initiate product flow, squeeze out a little of the product through the writer tip onto a paper towel. Use steady, even pressure to begin your detailing. Apply onto bisque or unfired glaze and then apply a clear glaze. Apply with a liner brush for fine outlining or brushstrokes. Use with Silkscreen Medium to apply silkscreen designs to bisque. Fire to shelf cone 05\/06 (1031°C\/999°C) or up to cone 6 (1222°C). Designer Liner is food safe with clear glaze applied overtop, AP Non-Toxic and Non Hazardous when used under normal conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eStorage:   \u003c\/em\u003eIf you anticipate using Designer Liner frequently, you may want to store the bottle with the metal tip left on the bottle. Place the metal straight pin (provided) into the metal writer tip as this will help keep the writer tip free from clogging. An alternative storage method is to remove the metal writer tip and reattach the white plastic tip to the screw cap. You will want to soak the metal writer tip in warm water to remove any traces of the designer liner from the nozzle. In either case it is important to minimize air exposure to Designer Liner. Always store at room temperature.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"River Craft Ceramics","offers":[{"title":"Default Title","offer_id":32198358106199,"sku":"SG406-001","price":6.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0014\/2858\/6583\/products\/mayco_sg406-175x175.jpg?v=1592785806"},{"product_id":"copy-of-designer-liner-brown","title":"Designer Liner Yellow SG407-001","description":"\u003ch4\u003e\u003cspan\u003e 1.25 oz squeeze bottle (includes metal writing tip).\u003c\/span\u003e\u003c\/h4\u003e\n\u003ch4\u003eHelpful Hints\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eRemove the white cap then gently puncture plastic tip with the metal writer tip.\u003c\/li\u003e\n\u003cli\u003eAfter placing the metal tip onto the bottle cap, push the included pin through the small ziptop bag and seal (this makes it easier to keep track of the pin).\u003c\/li\u003e\n\u003cli\u003eKeep the pin in the metal writer tip when not in use.\u003c\/li\u003e\n\u003cli\u003eDesigner Liner is clay based. As such, it is the nature to dry quickly which can promote clogging in the narrow passages of the metal and or plastic tips.\u003c\/li\u003e\n\u003cli\u003eClear or transparent glazing is necessary for gloss finish. Designer Liner will fire matte when no glaze is applied over top.\u003c\/li\u003e\n\u003cli\u003eDesign work could be distorted when applied on top of glazes that have a tendency to move.\u003c\/li\u003e\n\u003cli\u003eWipe tip periodically on a damp sponge to keep clean.\u003c\/li\u003e\n\u003cli\u003eKeep the metal pin to unclog the tip and keep the metal writer tip free from debris.\u003c\/li\u003e\n\u003cli\u003eIf Designer Liner begins to dry in the bottle you can add a few drops of water to reconstitute Designer Liner. Stir and test for proper viscosity. Add water in small amounts to avoid over-thinning the Designer Liner.\u003c\/li\u003e\n\u003cli\u003ePlace some Designer Liner on a tile and use a CB-110 #10\/0 Liner Brush for extra fine outlining or detailing.\u003c\/li\u003e\n\u003cli\u003eDesigner Liner is not a dimensional product. If applied too thick or heavy, Designer Liner will crack and possibly pop off.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 style=\"clear: both;\"\u003eApplication Recommendations\u003c\/h4\u003e\n\u003cp\u003e\u003cem\u003eBottle Prep:\u003c\/em\u003e   Before first using the product you will need to punch a hole in the tip of the plastic screw cap using the writer tip provided. DO NOT CUT the plastic tip or make the tip opening larger than the thickness of the metal writer tip. The metal writer tip is threaded and will snuggly fit on the tip of the screw cap.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eApplying Color:\u003c\/em\u003e   Shake bottle to force color down into the tip. To initiate product flow, squeeze out a little of the product through the writer tip onto a paper towel. Use steady, even pressure to begin your detailing. Apply onto bisque or unfired glaze and then apply a clear glaze. Apply with a liner brush for fine outlining or brushstrokes. Use with Silkscreen Medium to apply silkscreen designs to bisque. Fire to shelf cone 05\/06 (1031°C\/999°C) or up to cone 6 (1222°C). Designer Liner is food safe with clear glaze applied overtop, AP Non-Toxic and Non Hazardous when used under normal conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eStorage:   \u003c\/em\u003eIf you anticipate using Designer Liner frequently, you may want to store the bottle with the metal tip left on the bottle. Place the metal straight pin (provided) into the metal writer tip as this will help keep the writer tip free from clogging. An alternative storage method is to remove the metal writer tip and reattach the white plastic tip to the screw cap. You will want to soak the metal writer tip in warm water to remove any traces of the designer liner from the nozzle. In either case it is important to minimize air exposure to Designer Liner. Always store at room temperature.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"River Craft Ceramics","offers":[{"title":"Default Title","offer_id":32198361317463,"sku":"SG407-001","price":6.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0014\/2858\/6583\/products\/mayco_sg407-175x175.jpg?v=1592785851"},{"product_id":"copy-of-designer-liner-yellow","title":"Designer Liner Orange SG408-001","description":"\u003ch4\u003e\u003cspan\u003e 1.25 oz squeeze bottle (includes metal writing tip).\u003c\/span\u003e\u003c\/h4\u003e\n\u003ch4\u003eHelpful Hints\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eRemove the white cap then gently puncture plastic tip with the metal writer tip.\u003c\/li\u003e\n\u003cli\u003eAfter placing the metal tip onto the bottle cap, push the included pin through the small ziptop bag and seal (this makes it easier to keep track of the pin).\u003c\/li\u003e\n\u003cli\u003eKeep the pin in the metal writer tip when not in use.\u003c\/li\u003e\n\u003cli\u003eDesigner Liner is clay based. As such, it is the nature to dry quickly which can promote clogging in the narrow passages of the metal and or plastic tips.\u003c\/li\u003e\n\u003cli\u003eClear or transparent glazing is necessary for gloss finish. Designer Liner will fire matte when no glaze is applied over top.\u003c\/li\u003e\n\u003cli\u003eDesign work could be distorted when applied on top of glazes that have a tendency to move.\u003c\/li\u003e\n\u003cli\u003eWipe tip periodically on a damp sponge to keep clean.\u003c\/li\u003e\n\u003cli\u003eKeep the metal pin to unclog the tip and keep the metal writer tip free from debris.\u003c\/li\u003e\n\u003cli\u003eIf Designer Liner begins to dry in the bottle you can add a few drops of water to reconstitute Designer Liner. Stir and test for proper viscosity. Add water in small amounts to avoid over-thinning the Designer Liner.\u003c\/li\u003e\n\u003cli\u003ePlace some Designer Liner on a tile and use a CB-110 #10\/0 Liner Brush for extra fine outlining or detailing.\u003c\/li\u003e\n\u003cli\u003eDesigner Liner is not a dimensional product. If applied too thick or heavy, Designer Liner will crack and possibly pop off.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 style=\"clear: both;\"\u003eApplication Recommendations\u003c\/h4\u003e\n\u003cp\u003e\u003cem\u003eBottle Prep:\u003c\/em\u003e   Before first using the product you will need to punch a hole in the tip of the plastic screw cap using the writer tip provided. DO NOT CUT the plastic tip or make the tip opening larger than the thickness of the metal writer tip. The metal writer tip is threaded and will snuggly fit on the tip of the screw cap.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eApplying Color:\u003c\/em\u003e   Shake bottle to force color down into the tip. To initiate product flow, squeeze out a little of the product through the writer tip onto a paper towel. Use steady, even pressure to begin your detailing. Apply onto bisque or unfired glaze and then apply a clear glaze. Apply with a liner brush for fine outlining or brushstrokes. Use with Silkscreen Medium to apply silkscreen designs to bisque. Fire to shelf cone 05\/06 (1031°C\/999°C) or up to cone 6 (1222°C). Designer Liner is food safe with clear glaze applied overtop, AP Non-Toxic and Non Hazardous when used under normal conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eStorage:   \u003c\/em\u003eIf you anticipate using Designer Liner frequently, you may want to store the bottle with the metal tip left on the bottle. Place the metal straight pin (provided) into the metal writer tip as this will help keep the writer tip free from clogging. An alternative storage method is to remove the metal writer tip and reattach the white plastic tip to the screw cap. You will want to soak the metal writer tip in warm water to remove any traces of the designer liner from the nozzle. In either case it is important to minimize air exposure to Designer Liner. Always store at room temperature.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"River Craft Ceramics","offers":[{"title":"Default Title","offer_id":32198362497111,"sku":"SG408-001","price":6.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0014\/2858\/6583\/products\/mayco_sg408-175x175.jpg?v=1592785911"},{"product_id":"copy-of-designer-liner-orange","title":"Designer Liner Bright Green SG409-001","description":"\u003ch4\u003e\u003cspan\u003e 1.25 oz squeeze bottle (includes metal writing tip).\u003c\/span\u003e\u003c\/h4\u003e\n\u003ch4 style=\"text-align: center;\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4\u003eHelpful Hints\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eRemove the white cap then gently puncture plastic tip with the metal writer tip.\u003c\/li\u003e\n\u003cli\u003eAfter placing the metal tip onto the bottle cap, push the included pin through the small ziptop bag and seal (this makes it easier to keep track of the pin).\u003c\/li\u003e\n\u003cli\u003eKeep the pin in the metal writer tip when not in use.\u003c\/li\u003e\n\u003cli\u003eDesigner Liner is clay based. As such, it is the nature to dry quickly which can promote clogging in the narrow passages of the metal and or plastic tips.\u003c\/li\u003e\n\u003cli\u003eClear or transparent glazing is necessary for gloss finish. Designer Liner will fire matte when no glaze is applied over top.\u003c\/li\u003e\n\u003cli\u003eDesign work could be distorted when applied on top of glazes that have a tendency to move.\u003c\/li\u003e\n\u003cli\u003eWipe tip periodically on a damp sponge to keep clean.\u003c\/li\u003e\n\u003cli\u003eKeep the metal pin to unclog the tip and keep the metal writer tip free from debris.\u003c\/li\u003e\n\u003cli\u003eIf Designer Liner begins to dry in the bottle you can add a few drops of water to reconstitute Designer Liner. Stir and test for proper viscosity. Add water in small amounts to avoid over-thinning the Designer Liner.\u003c\/li\u003e\n\u003cli\u003ePlace some Designer Liner on a tile and use a CB-110 #10\/0 Liner Brush for extra fine outlining or detailing.\u003c\/li\u003e\n\u003cli\u003eDesigner Liner is not a dimensional product. If applied too thick or heavy, Designer Liner will crack and possibly pop off.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 style=\"clear: both;\"\u003eApplication Recommendations\u003c\/h4\u003e\n\u003cp\u003e\u003cem\u003eBottle Prep:\u003c\/em\u003e   Before first using the product you will need to punch a hole in the tip of the plastic screw cap using the writer tip provided. DO NOT CUT the plastic tip or make the tip opening larger than the thickness of the metal writer tip. The metal writer tip is threaded and will snuggly fit on the tip of the screw cap.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eApplying Color:\u003c\/em\u003e   Shake bottle to force color down into the tip. To initiate product flow, squeeze out a little of the product through the writer tip onto a paper towel. Use steady, even pressure to begin your detailing. Apply onto bisque or unfired glaze and then apply a clear glaze. Apply with a liner brush for fine outlining or brushstrokes. Use with Silkscreen Medium to apply silkscreen designs to bisque. Fire to shelf cone 05\/06 (1031°C\/999°C) or up to cone 6 (1222°C). Designer Liner is food safe with clear glaze applied overtop, AP Non-Toxic and Non Hazardous when used under normal conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eStorage:   \u003c\/em\u003eIf you anticipate using Designer Liner frequently, you may want to store the bottle with the metal tip left on the bottle. Place the metal straight pin (provided) into the metal writer tip as this will help keep the writer tip free from clogging. An alternative storage method is to remove the metal writer tip and reattach the white plastic tip to the screw cap. You will want to soak the metal writer tip in warm water to remove any traces of the designer liner from the nozzle. In either case it is important to minimize air exposure to Designer Liner. Always store at room temperature.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"River Craft Ceramics","offers":[{"title":"Default Title","offer_id":32198366986327,"sku":"SG409-001","price":6.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0014\/2858\/6583\/products\/mayco_sg409-175x175.jpg?v=1592785966"},{"product_id":"copy-of-designer-liner-bright-green","title":"Designer Liner Bright Blue SG410-001","description":"\u003ch4\u003e\u003cspan\u003e 1.25 oz squeeze bottle (includes metal writing tip).\u003c\/span\u003e\u003c\/h4\u003e\n\u003ch4 style=\"text-align: center;\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4\u003eHelpful Hints\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eRemove the white cap then gently puncture plastic tip with the metal writer tip.\u003c\/li\u003e\n\u003cli\u003eAfter placing the metal tip onto the bottle cap, push the included pin through the small ziptop bag and seal (this makes it easier to keep track of the pin).\u003c\/li\u003e\n\u003cli\u003eKeep the pin in the metal writer tip when not in use.\u003c\/li\u003e\n\u003cli\u003eDesigner Liner is clay based. As such, it is the nature to dry quickly which can promote clogging in the narrow passages of the metal and or plastic tips.\u003c\/li\u003e\n\u003cli\u003eClear or transparent glazing is necessary for gloss finish. Designer Liner will fire matte when no glaze is applied over top.\u003c\/li\u003e\n\u003cli\u003eDesign work could be distorted when applied on top of glazes that have a tendency to move.\u003c\/li\u003e\n\u003cli\u003eWipe tip periodically on a damp sponge to keep clean.\u003c\/li\u003e\n\u003cli\u003eKeep the metal pin to unclog the tip and keep the metal writer tip free from debris.\u003c\/li\u003e\n\u003cli\u003eIf Designer Liner begins to dry in the bottle you can add a few drops of water to reconstitute Designer Liner. Stir and test for proper viscosity. Add water in small amounts to avoid over-thinning the Designer Liner.\u003c\/li\u003e\n\u003cli\u003ePlace some Designer Liner on a tile and use a CB-110 #10\/0 Liner Brush for extra fine outlining or detailing.\u003c\/li\u003e\n\u003cli\u003eDesigner Liner is not a dimensional product. If applied too thick or heavy, Designer Liner will crack and possibly pop off.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 style=\"clear: both;\"\u003eApplication Recommendations\u003c\/h4\u003e\n\u003cp\u003e\u003cem\u003eBottle Prep:\u003c\/em\u003e   Before first using the product you will need to punch a hole in the tip of the plastic screw cap using the writer tip provided. DO NOT CUT the plastic tip or make the tip opening larger than the thickness of the metal writer tip. The metal writer tip is threaded and will snuggly fit on the tip of the screw cap.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eApplying Color:\u003c\/em\u003e   Shake bottle to force color down into the tip. To initiate product flow, squeeze out a little of the product through the writer tip onto a paper towel. Use steady, even pressure to begin your detailing. Apply onto bisque or unfired glaze and then apply a clear glaze. Apply with a liner brush for fine outlining or brushstrokes. Use with Silkscreen Medium to apply silkscreen designs to bisque. Fire to shelf cone 05\/06 (1031°C\/999°C) or up to cone 6 (1222°C). Designer Liner is food safe with clear glaze applied overtop, AP Non-Toxic and Non Hazardous when used under normal conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eStorage:   \u003c\/em\u003eIf you anticipate using Designer Liner frequently, you may want to store the bottle with the metal tip left on the bottle. Place the metal straight pin (provided) into the metal writer tip as this will help keep the writer tip free from clogging. An alternative storage method is to remove the metal writer tip and reattach the white plastic tip to the screw cap. You will want to soak the metal writer tip in warm water to remove any traces of the designer liner from the nozzle. In either case it is important to minimize air exposure to Designer Liner. Always store at room temperature.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"River Craft Ceramics","offers":[{"title":"Default Title","offer_id":32198367477847,"sku":"SG410-001","price":4.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0014\/2858\/6583\/products\/mayco_sg410-175x175.jpg?v=1592786016"},{"product_id":"copy-of-mayco-stoneware-color-poster-2023","title":"Mayco Fundamentals Underglaze \/ Duncan EZ Stroke\/ Designer Liner Color Poster 2025","description":"\u003cp\u003eLarge Wall Size Poster \u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"pn\"\u003e\u003cspan\u003eTwo Sided\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"pn\"\u003e\u003cspan\u003eLow Fire on one side - Mid Range on the other\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"River Craft Ceramics","offers":[{"title":"Default Title","offer_id":40421985222743,"sku":"MC500E","price":1.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0014\/2858\/6583\/files\/MC486E-1000x1000.jpg?v=1704056369"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0014\/2858\/6583\/collections\/mayco_designer_liner_logo-175x175.png?v=1592177206","url":"https:\/\/rivercraftceramics.com\/en-ca\/collections\/designer-liner\/ceramic.oembed","provider":"River Craft Ceramics","version":"1.0","type":"link"}