AGED METALLIC FACETED CAT
Designer: Bob Moreni
SUPPLIES
Form
- CD1517+ Faceted Cat Mold or MB-1517 Faceted Cat Bisque
Colors
- MM-102 Copper Metalic
- MM-104 Dark Bronze Metallic
- MM-105 Gold Metallic
- MM-106 Steel Metallic
- MM-202 Green Patina
- MM-305 Rapid Rust
- SS-138 Flat Black
Decorating Accessories
- Basecoat Brush
- AC-502 Matte Sealer
- MM-600 Spritzer Caps
Miscellaneous Accessories
- Foam Plates
- Paper Towels
- Water Bowl
INSTRUCTIONS
- Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
- Basecoat the cat with SS-138 Flat Black. Allow to dry!
- Apply 2 coats of MM-104 Dark Bronze Metallic to the cat. Allow to dry!
- Place the cat on a couple layers of paper towels.
- Working from the bottle of metallic color drizzle MM-102 Copper Metallic then some MM-105 Gold Metallic.
- Spritz a heavy coating of MM-202 Green Patina to the piece while the MM-102 Copper Metallic and the MM-105 Gold Metallic are still wet.
- Drizzle a little more of the MM-102 Copper Metallic and the MM-105 Gold Metallic then spritz again, not as heavy. Allow to dry!
- Working from the bottle of metallic color drizzle MM-106 Steel Metallic here and there on the piece. Spritz with MM-305 Rapid Rust on the MM-106 Steel Metallic while it is still wet. Allow to dry!
- Apply 1-2 coats of AC502 Matte Sealer to the piece.
- DO NOT FIRE