FREE SHIPPING ON ORDERS OVER $50.00 - NO Promo Code Needed Ends Midnight 04/27/2024



ELEMENTS, CRYSTAL, AND CASCADE TREES

Posted by Tony Tabor on

ELEMENTS, CRYSTAL, AND CASCADE TREES
Colors
  • EL-127 Rose Granite
  • EL-130 Sea Green
  • EL-149 Lavender Flower
  • CG-993 Lavender Sprigs
  • CG-995 Foggy Mist
  • CG-996 Spring Rain
  • PC-601 Clear Cascade
INSTRUCTIONS
Large Tree:
  1. Begin with properly fired cone 04 bisque. Moisten a sponge and wipe bisque to remove any dust.
  2. Using the Soft Fan with EL-149 Lavender Flower, apply 3 coats to the large tree. Allow glaze to dry between coats.
  3. Using the Soft Fan with PC-601 Clear Cascade, apply random “plops” of glaze to the top half of the large tree. Allow glaze to dry.
  4. Using the Soft Fan with CG-993 Lavender Sprigs, apply 2 coats to the top half of the large tree. The bottom edge of your coats should be irregular, not a straight line going around the tree. Allow glaze to dry between coats.
  5. Using the Soft Fan with PC-601 Clear Cascade, apply a few random “plops” of glaze to the top half of the large tree.
  6. Stilt and fire to cone 06.
Medium Tree:
  1. Begin with properly fired cone 04 bisque. Moisten a sponge and wipe bisque to remove any dust.
  2. Using the Soft Fan with EL-130 Sea Green, apply 3 coats to the medium tree. Allow glaze to dry between coats.
  3. Using the Soft Fan with PC-601 Clear Cascade, apply random “plops” of glaze to the top half of the medium tree. Allow glaze to dry.
  4. Using the Soft Fan with CG-996 Spring Rain, apply 2 coats to the top half of the medium tree. The bottom edge of your coats should be irregular, not a straight line going around the tree. Allow glaze to dry between coats.
  5. Using the Soft Fan with PC-601 Clear Cascade, apply a few random “plops” of glaze to the top half of the medium tree.
  6. Stilt and fire to cone 06.
Small Tree:
  1. Begin with properly fired cone 04 bisque. Moisten a sponge and wipe bisque to remove any dust.
  2. Using the Soft Fan with EL-127 Rose Granite, apply 3 coats to the small tree. Allow glaze to dry between coats.
  3. Using the Soft Fan with PC-601 Clear Cascade, apply random “plops” of glaze to the top half of the small tree. Allow glaze to dry.
  4. Using the Soft Fan with CG-995 Foggy Mist, apply 2 coats to the top half of the small tree. The bottom edge of your coats should be irregular, not a straight line going around the tree. Allow glaze to dry between coats.
  5. Using the Soft Fan with PC-601 Clear Cascade, apply a few random “plops” of glaze to the top half of the small tree.
  6. Stilt and fire to cone 06.