PINK AND WHITE GOLD RETRO TREE

PINK AND WHITE GOLD RETRO TREE

• FN-209 Floral Pink
• SC-18 Rosey Posey
• OG802 White Gold
• OG803 MOP Brush-On

1. Using the Soft Fan with SC-18 Rosey Posey, apply 1 coat to the outside of the tree and base. Use a damp sponge to remove most of the glaze, leaving it only in the crevices.
2. Using the Soft Fan with FN-209 Floral Pink, apply 3 coats to the outside of the tree and base. Allow glaze to dry between coats.
3. After the piece is dry, make sure to clean out any glaze in the holes.
4. Stilt and fire to cone 06.
5. Using the Liner and Filbert with OG802 White Gold, apply 1 even coat to each of the smooth “drips” on the tree. Make a line going around base.
6. Fire to cone 018.
7. Using the Shader with OG803 MOP Brush-On, apply 1 coat to the tree and base. Try to avoid the white gold.
8. Fire to cone 020.
9. Glue the swirl lights into the holes using epoxy.
10. Assemble the light kit and attach the light to the base.