~LIVEWITHCHRIS Starts at 3pm Sunday~
Log in Sign up
Cart (0)

MAYCO AND DUNCAN VINTAGE TRUCK

Posted by Tony Tabor on

MAYCO AND DUNCAN VINTAGE TRUCK

Designer: Elizabeth Carey

SUPPLIES

Form

  • MB-1508 Vintage Truck Container bisque or CD1508 Vintage Truck mold

Colors

Mayco

  • FN-001 White
  • SC-15 Tuxedo
  • SC-9 Jaded
  • SC-26 Green Thumb
  • SC-27 Sour Apple
  • SC-74 Hot Tamale
  • SC-96 Aqu-ward

Duncan

  • CN507 Neon Red
  • CN302 Bright Caribbean
  • CN074 Really Red
  • OG802 White Gold
  • OG803 Mother of Pearl

Decorating Accessories

  • AC-230 Clay Carbon Paper
  • RB-144 #4 Soft Fan
  • RB-106 #6 Script Liner
  • RB-110 10/0 Detail Liner
  • CB-220 2/0 Detail Liner
  • CB-404 Size 4 Pointed Round
  • CB-425 1/2” Oval Glaze Mop

Miscellaneous Accessories

  • Water
  • Pencil
  • Sponge
  • Logo of choice

INSTRUCTIONS

  1. Begin with properly fired cone 04 bisque. Moisten a sponge and wipe bisque to remove any dust.
  2. Using the Soft Fan with FN-001 White, apply 2 coats to the entire truck. Allow glaze to dry between coats.
  3. Using the Script Liner with SC-96 Aqu-ward, apply 2 coats to the windows. Shade the corners with CN 302 Bright Caribbean.
  4. Using the Script Liner with CN 074 Really Red, apply 2 coats to the wheel wells, top and trim. Allow glaze to dry between coats.
  5. Use the pencil to sketch flowers with 5 petals, ivy leaves and single, small leaves in groups of 2 or 3. They do not need to be perfect, just try to evenly space them out. Add berries in the bare spots (groups of 3 dots).
  6. Using the Script Liner with CN 507 Neon Red apply 1 coat to the flowers. Apply a second coat and shade the edges with SC-74 Hot Tamale.
  7. Using the Detail Liner with SC-26 Green Thumb, apply 2 coats to the ivy leaves. Allow glaze to dry between coats.
  8. Using the Detail Liner with SC-27 Sour Apple and SC-9 Jaded, apply 2 coats to the small, single leaves. Allow glaze to dry between coats.
  9. Using the Detail Liner with CN 074 Really Red, apply a dot of glaze to each of the berries.
  10. Using the Script Liner with SC-96 Aqu-ward, apply 2 coats to the hubcaps.
  11. Using the Script Liner with SC-9 Jaded, apply 1 coat to the outer edge of the hubcaps.
  12. Using the Script Liner with SC-96 Aqu-ward, apply 2 coats to the lights. Allow glaze to dry between coats.
  13. Using the Script Liner with CN 253 Black, apply 2 coats to the tires. Allow glaze to dry between coats. Use the Detail Liner to outline the details and design on the truck.
  14. Fire to cone 06.
  15. Using the Detail Liner with OG802 White Gold, apply a thin, even coat to the bumpers, grille and door handles.
  16. Fire to cone 018.
  17. Using the Glaze Mop with OG803 Mother of Pearl, apply a thin, even coat over the entire truck. Apply using a circular motion.
  18. Fire to cone 020.
  19. Using the Pointed Round, apply AS 974 Glittering No-Fire Snow to the truck. Allow to dry 24-48 hours.