Elements Elephant Planter

INSTRUCTIONS

1. Secure the mold with straps.
2. Pour slip into mold and allow to set for 15-20 minutes.
3. Pour slip out of mold and allow to set up completely.
4. Remove the piece from the mold.
5. Clean seams and cut out a hole for the planter.
6. Allow to dry completely.
7. Bisque fire to cone 04.

1. Begin with properly fired cone 04 bisque. Moisten a clean sponge and wipe the bisque to remove any dust.
2. Using a soft fan, apply 2 coats of PC-601 Clear Cascades around the opening of the planter.
3. Apply 2 coats of EL-121 Copper Adventurine to the entire planter.
4. Apply 2 coats of EL-208 Moss Creek to the planter; recede the second coat so that it only goes down about ½ way.
5. Fully load the fan brush with PC-602 White Cascades and plop it around the opening of the planter.
6. Allow to dry completely.
7. Stilt and fire to cone 06.

• EL-121 Copper Adventurine
• EL-208 Moss Creek
• PC-601 Clear Cascade
• PC-602 White Cascade