News
TEAL AND TANGERINE FOUNDATIONS CUP
Posted by Tony Tabor on
Fun Project Idea! TEAL AND TANGERINE FOUNDATIONS CUP INSTRUCTIONS Begin with properly fired cone 04 stoneware bisque. Moisten a clean sponge and wipe bisque to remove any dust. Apply masking tape directly to the bisque in a desired pattern. Using a fan brush, apply 3 coats of FN-042 Teal Blue to the outside of the tumbler. Remove the tape and fill the lines in with 3 coats of FN-052 Tangerine. Use a fan brush to apply 3 coats to the inside of the piece. Allow the glaze to dry completely and then use the Designer Liner to embellish the piece....
Stoneware Wash Faceted Vase
Posted by Tony Tabor on
Fun Project Idea! Stoneware Wash Faceted Vase INSTRUCTIONS Begin with properly fired cone 04 bisque. Moisten a sponge and wipe bisque to remove any dust. Pour around 1/2 cup of EL-107 Amber Ash into the disposable cup. Thin with water until it is easily poured. Pour into the vase and rotate until the inside is covered. Pour out the excess. Pour around 1 TBS of SW-303 Manganese Wash onto the palette. Dip the sponge on a stick into the wash and sponge the stamp. Press the stamp onto the top half of the vase, 1 face at a time. Repeat...
DESERT ELEMENTS CACTI
Posted by Tony Tabor on
Fun Projects! Designer: Marcia Roullard INSTRUCTIONS *Begin with properly fired shelf cone 04 Bisque. Moisten a clean sponge and wipe bisque to remove dust. Vase Thin S-2101 Clear and pour inside the vase. Turn the vase to coat the inside and pour out the excess glaze. Drain. Use the Soft Fan to apply two coats of EL-123 Patina. Use the same brush to plop PC-602 White Cascade over the vase, leaving spaces between plops. Start 3 1/2″ up from the bottom of the vase and go out only 1″ from the top of the arms. Since the vase is a vertical...
HAWAIINN OWL
Posted by Tony Tabor on
Fun Project! HAWAIINN OWL INSTRUCTIONS 1. Begin with a properly fired shelf cone 04 Bisque. Moisten a clean sponge and wipe bisque to remove dust. 2. Thin slightly FN-018 Bright Blue, pour to the inside, roll to coat, pour out the excess, drain. 3. Brush the light area of the eyes and the belly with two coats of SC-55 Yell about It, use CB-604 Soft Fan and CB-106 Script Liner. 4. Brush three coats of SC-75 Orange A Peel to the top and back section of the owl, use CB-106 Script Liner, and CB-604 Soft Fan. 5. When dry, use...
CANVAS POURING WITH SCULPTING MEDIUM
Posted by Tony Tabor on
Fun Project Idea! CANVAS POURING WITH SCULPTING MEDIUM Instructions: Begin with properly fired bisque. Use a damp sponge to remove any dust. Tape off an “X” shape on the canvas then add sculpting medium to the un-taped triangle areas. Let the Sculpting Medium dry. Using the tape, create a wall to stop the glaze from falling off the side. Spray surface to dampen with the mister bottle. Fill pouring cup with SC-85 Orkid, SC-1 Pink-A-Boo, SX-18 Rosey Posey, SC-13 Grapel, and SC-33 Fruit of the Vine. Begin with a straight pour (pouring onto the middle of the canvas). Optional: Move...